WoW Ace Updater

[dsingler]

Anyone gotten the new WoW Ace updater to work? i keep getting a name is too long error when trying to install any suggestions?

[mojo_support]

Could you please get back to us with the Screen shot of the Error message reported when trying to install Wow Ace Updater inside Mojopac.

[dsingler]

http://img292.imageshack.us/img292/1480/mojoerrorew8.th.jpg (http://img292.imageshack.us/my.php?image=mojoerrorew8.jpg)

When i click details i get the following:

PLATFORM VERSION INFO
Windows : 5.1.2600.131072 (Win32NT)
Common Language Runtime : 2.0.50727.1433
System.Deployment.dll : 2.0.50727.1433 (REDBITS.050727-1400)
mscorwks.dll : 2.0.50727.1433 (REDBITS.050727-1400)
dfdll.dll : 2.0.50727.1433 (REDBITS.050727-1400)
dfshim.dll : 2.0.50727.1433 (REDBITS.050727-1400)

SOURCES
Deployment url : file:///C:/Install_WAU/WowAceUpdater.application
Application url : file:///C:/Install_WAU/Application%20Files/WowAceUpdater_1_9_45_718/WowAceUpdater.exe.manifest

IDENTITIES
Deployment Identity : WowAceUpdater.application, Version=1.9.45.718, Culture=neutral, PublicKeyToken=4d89fb8d52541cc9, processorArchitecture=msil
Application Identity : WowAceUpdater.exe, Version=1.9.45.718, Culture=neutral, PublicKeyToken=4d89fb8d52541cc9, processorArchitecture=msil, type=win32

APPLICATION SUMMARY
* Installable application.

ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of C:\Install_WAU\WowAceUpdater.application resulted in exception. Following failure messages were detected:
+ Transaction did not complete. The file name may be too long. Shorten the file name, and try again.
+ The system cannot find the path specified. (Exception from HRESULT: 0x80070003)

COMPONENT STORE TRANSACTION FAILURE SUMMARY
* Transaction at [4/4/2008 12:41:16 PM]
- Staging of a component file (Ace.ico) did not succeed.
- Staging of a component file (WowAceUpdater.exe.config) did not succeed.
- Staging of a component (WowAceUpdater.exe.genman) did not succeed.
- Staging of a component file (WowAceUpdater.exe) did not succeed.
- Installation of deployment (file:///C:/Install_WAU/WowAceUpdater.application#WowAceUpdater.applicatio n, Version=1.9.45.718, Culture=neutral, PublicKeyToken=4d89fb8d52541cc9, processorArchitecture=msil) did not succeed.
- Setting one or more of the deployment metadata did not succeed.

WARNINGS
There were no warnings during this operation.

OPERATION PROGRESS STATUS
* [4/4/2008 12:41:06 PM] : Activation of C:\Install_WAU\WowAceUpdater.application has started.
* [4/4/2008 12:41:12 PM] : Processing of deployment manifest has successfully completed.
* [4/4/2008 12:41:12 PM] : Installation of the application has started.
* [4/4/2008 12:41:12 PM] : Processing of application manifest has successfully completed.
* [4/4/2008 12:41:15 PM] : Request of trust and detection of platform is complete.
* [4/4/2008 12:41:16 PM] : Downloading of subscription dependencies is complete.
* [4/4/2008 12:41:16 PM] : Commit of the downloaded application has started.

ERROR DETAILS
Following errors were detected during this operation.
* [4/4/2008 12:41:16 PM] System.Deployment.Application.DeploymentException (ComponentStore)
- Transaction did not complete. The file name may be too long. Shorten the file name, and try again.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentStore.Submi tStoreTransaction(StoreTransactionContext storeTxn, SubscriptionState subState)
at System.Deployment.Application.ComponentStore.Submi tStoreTransactionCheckQuota(StoreTransactionContex t storeTxn, SubscriptionState subState)
at System.Deployment.Application.ComponentStore.Commi tApplication(SubscriptionState subState, CommitApplicationParams commitParams)
at System.Deployment.Application.SubscriptionStore.Co mmitApplication(SubscriptionState& subState, CommitApplicationParams commitParams)
at System.Deployment.Application.ApplicationActivator .InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator .PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension)
at System.Deployment.Application.ApplicationActivator .ActivateDeploymentWorker(Object state)
--- Inner Exception ---
System.IO.DirectoryNotFoundException
- The system cannot find the path specified. (Exception from HRESULT: 0x80070003)
- Source: System.Deployment
- Stack trace:
at System.Deployment.Internal.Isolation.IStore.Transa ct(IntPtr cOperation, StoreTransactionOperation[] rgOperations, UInt32[] rgDispositions, Int32[] rgResults)
at System.Deployment.Internal.Isolation.Store.Transac t(StoreTransactionOperation[] operations, UInt32[] rgDispositions, Int32[] rgResults)
at System.Deployment.Application.ComponentStore.Submi tStoreTransaction(StoreTransactionContext storeTxn, SubscriptionState subState)

COMPONENT STORE TRANSACTION DETAILS
* Transaction at [4/4/2008 12:41:16 PM]
+ System.Deployment.Internal.Isolation.StoreOperatio nStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: ZZPAWCMX.YR8.application
+ System.Deployment.Internal.Isolation.StoreOperatio nSetDeploymentMetadata
- Status: Set
- HRESULT: 0x0
+ System.Deployment.Internal.Isolation.StoreOperatio nStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: WowAceUpdater.exe.manifest
+ System.Deployment.Internal.Isolation.StoreOperatio nStageComponentFile
- Status: Failed
- HRESULT: 0x80070003
- File: Ace.ico
+ System.Deployment.Internal.Isolation.StoreOperatio nStageComponentFile
- Status: Failed
- HRESULT: 0x1
- File: WowAceUpdater.exe.config
+ System.Deployment.Internal.Isolation.StoreOperatio nStageComponent
- Status: Failed
- HRESULT: 0x1
- Manifest: WowAceUpdater.exe.genman
+ System.Deployment.Internal.Isolation.StoreOperatio nStageComponentFile
- Status: Failed
- HRESULT: 0x1
- File: WowAceUpdater.exe
+ System.Deployment.Internal.Isolation.StoreOperatio nInstallDeployment
- Status: Failed
- HRESULT: 0x1
- AppId: file:///C:/Install_WAU/WowAceUpdater.application#WowAceUpdater.applicatio n, Version=1.9.45.718, Culture=neutral, PublicKeyToken=4d89fb8d52541cc9, processorArchitecture=msil
+ System.Deployment.Internal.Isolation.StoreOperatio nSetDeploymentMetadata
- Status: Failed
- HRESULT: 0x1
+ System.Deployment.Internal.Isolation.StoreTransact ionOperationType (27)
- HRESULT: 0x1


.NET 3.5 is required to run this, i installed it then rebooted the device but still no luck as well as used both firefox and ie 7.x to get it to work, get the same error for both.

The error that i notice is that a naming convention is too long? does that sound correct? i'm okay if i can't use is as i can just copy over but i use my mojo to try new UI's out so i don't disrupt my PC...


edit: this works fine on the base pc, as well as other pcs it's only within the shell i get this error.
thanks

[mojotech]

There are certain known issues with the .Net Framework 3.x versions. Our developer's are working diligently to address this issue. As soon as it’s available, we will be letting everyone know.

However, to isolate the cause of the issue could you please select a short path to intall and check the functionality.

[dsingler]

However, to isolate the cause of the issue could you please select a short path to intall and check the functionality.

Not certain what you mean by this?!?!


I know the work around, it just means i use the updater on my main pc that I play WoW on. then copy over the folders to the mojo drive. it will work that way I just was curious, since i've not run into any issues using mojopac to run games/programs etc. This product if quite useful imho, keep up the good work.

Thank you for the help, I appreciate your quick replies.

[mojo_support]

We thank you for appreciating our Product. It just makes us feel all our efforts are really worth it. We assure you of making the product best. Thank you for your appreciation.

Originally Posted by mojotech
However, to isolate the cause of the issue could you please select a short path to intall and check the functionality.

If the installer is asking to select and locate any path, then you need to select a short location like "C:\". However, I have personally verified and found that the installer is not prompting for any path to install the software and error message is reported. Please understand that we are deligently working to address all such issues to make our product even better for you.

[dsingler]

No worries, No hurry.

I can wait ;)

Thanks again.

[kmcarter]

Hi Mojo,

I'm also interested in the solution to this issue. I'm currently seeing the same issue under .NET Framework 2.0 SP1.

Ken